高峰值功率脉冲激光器Q2可输出1064nm, 532nm, 355nm, 266nm, 213nm, 1053nm, 526.5nm, 351nm, 263nm, 211nm激光波长-孚光精仪

销售排行榜

暂无信息

浏览历史

清空

商品详情

这款高峰值功率脉冲激光器采用调Q脉冲激光器技术,可输出1064nm, 532nm, 355nm, 266nm, 213nm, 1053nm, 526.5nm, 351nm, 263nm, 211nm激光波长,采用Nd:YLF半导体泵浦固体激光DPSS技术制造,结构紧凑而能量稳定,非常适合激光诱导击穿光谱LIBS,光致荧光光谱LIF,激光烧蚀和激光遥感等应用。
高峰值功率脉冲激光器特点
输出高达80mJ脉冲能量，平均功率可达2W

空气冷却制冷,不需要水冷
重复频率可达100Hz

短脉冲脉宽＜2.5ns

重复频率可调

内置同步脉冲发生器，用于触发用户其它设备，方便使用。

通过内置的以太网或WiFi接口进行远程控制

可选二倍频,三倍频,四倍频或五倍频等谐波发生器。

可选基频光衰减器

可选的光纤耦合输出

寿命高达2G个激光脉冲
$title

高峰值功率脉冲激光器简述

高峰值功率脉冲激光器是一款紧凑高效的空气制冷Q开关激光器,具较高的脉冲峰值功率，非常适合激光诱导击穿光谱LIBS,光致荧光光谱LIF,激光烧蚀和激光遥感等应用。

高峰值功率脉冲激光器可产生80mJ@10Hz或20mJ@100Hz的激光脉冲,具有超低发散角和较高的倍频效率,***高可到倍频波长211nm,使用OPO后波长可扩展到红外范围。

高峰值功率脉冲激光器采用全空气冷却模式得益于它*越的wall-plug效率，液体不用于传热，因此不需要经常*换冷却液或清洗冷却系统。在内部触发模式下具有较低抖动,可采用脉冲触发用户设备,如果需要，激光脉冲可以从延时发生器外部触发,允许在单次发射（single-shot）或可变脉冲重复模式下操作。

具有以太网接口,方便从电脑上控制和监测激光器,WiFi可选。
这款高峰值功率脉冲激光器可配置1053nm和1064nm基频波长，其中1053nm激光器采用Nd:YLF晶体，可以在单脉冲到***高重复频率范围内工作，而不改变发散角和光束质量。
高峰值功率脉冲激光器应用

激光诱导击穿光谱LIBS
时间飞行光谱TOFS
激光诱导荧光光谱LIF
激光闪光光解
基质辅助激光解析电离MALDI
脉冲光沉积PLD
遥感
激光烧蚀
TFT-LCD激光修复
PIV激光粒子图形测速
高峰值功率脉冲激光器技术参数

具有10 Hz, 20 Hz, 50 Hz 100/200 Hz重复频率

10Hz重复频率参数¹⁾

Model	Q2
	-B10	-C10	-D10	-E10	-F10
Wavelength, nm	1053 or 1064 nm			1053 nm
Pulse repetition rate²⁾	10 Hz
Pulse energy, mJ	8 mJ	15 mJ	30 mJ	60 mJ	80 mJ
Typical pulse duration ³⁾	< 8 ns		<7 ns		<5 ns
Pulse energy stability ⁴⁾	< 0.5 % RMS
Power drift ⁵⁾	± 3.0 %
Beam profile	Bell-shaped, >80% fit to Gaussian
Beam divergence ⁶⁾	<1 mrad
Polarization	Linear, horizontal
Typical beam diameter ⁷⁾	1.5 mm		2.0 mm	3.0 mm	4.0 mm
Jitter ⁸⁾	< 0.5 ns RMS
Optional harmonics generator ⁹⁾
Pulse energy
526.5/532 nm	4 mJ	7 mJ	15 mJ	30 mJ	40 mJ
351/355 nm	2.4 mJ	4.5 mJ	9 mJ	18 mJ	24 mJ
263/266 nm	1.6 mJ	2.8 mJ	6 mJ	12 mJ	16 mJ
211/213 nm	0.4 mJ	1 mJ	2 mJ	4 mJ	5 mJ
Optional attenuator ¹⁰⁾
Transmission range	0.5 – 95 %
Dimensions
Laser head ( W×L×H)	160× 230× 141 mm³
Controller unit (W×L×H)	108× 191 × 59 mm³
Power adapter (W×L×H) ¹¹⁾	80 × 120 × 60 mm typical
Operating requirements
Cooling requirements	Air cooled
Ambient temperature	15 – 30 ºC
Relative humidity	10 – 80 % (non-condensing)
Mains voltage	90-230 VAC, single phase, 47-63 Hz ¹²⁾
Average power consumption	30 W		40 W	50 W	60 W

20Hz重复频率参数¹⁾

Model	Q2
	-B20	-C20	-D20	-E20
Wavelength, nm	1053 or 1064 nm			1053 nm
Pulse repetition rate²⁾	20 Hz
Pulse energy, mJ	10 mJ	20 mJ	50 mJ	70 mJ
Typical pulse duration ³⁾	< 7 ns		< 5 ns
Pulse to pulse energy stability ⁴⁾	< 0.5 % RMS
Power drift ⁵⁾	± 3.0 %
Beam profile	Bell-shaped, >80 % fit to Gaussian
Beam divergence ⁶⁾	<1 mrad
Polarization	Linear, horizontal
Typical beam diameter ⁷⁾	1.5 mm		3.0 mm	4 mm
Jitter ⁸⁾	< 0.5 ns RMS
Optional harmonics generator ⁹⁾
Pulse energy
526.5/532 nm	5 mJ	10 mJ	25 mJ	35 mJ
351/355 nm	3 mJ	6 mJ	15 mJ	20 mJ
263/266 nm	2 mJ	4 mJ	10 mJ	12 mJ
211/213 nm	0.5 mJ	1 mJ	2 mJ	3 mJ
Optional attenuator ¹⁰⁾
Transmission range	0.5 – 95 %
Dimensions
Laser head ( W×L×H)	160× 230× 141 mm³
Controller unit (W×L×H)	108× 191 × 59 mm³
Power adapter (W×L×H) ¹¹⁾	80 × 120 × 60 mm typical
Operating requirements
Cooling requirements	Air cooled
Ambient temperature	15 – 30 ºC
Relative humidity	10 – 80 % (non-condensing)
Mains voltage	90-230 VAC, single phase, 47-63 Hz ¹²⁾
Average power consumption	30 W	40 W	70 W	80 W

50 Hz 重复频率参数 ¹⁾

Model	Q2
	-B50	-C50	-D50
Wavelength, nm	1053 or 1064 nm		1064 nm
Pulse repetition rate ²⁾	50 Hz
Pulse energy, mJ	10 mJ	20 mJ	40 mJ
Typical pulse duration ³⁾	< 7 ns	<6 ns	<5 ns
Pulse to pulse energy stability ⁴⁾	< 0.5 % RMS
Power drift ⁵⁾	± 3.0 %
Beam profile	Bell-shaped, >80 % fit to Gaussian
Beam divergence ⁶⁾	<1 mrad
Polarization	Linear, horizontal
Typical beam diameter ⁷⁾	1.5 mm	2.5 mm	3.5 mm
Jitter ⁸⁾	< 0.5 ns RMS
Optional harmonics generator ⁹⁾
Pulse energy
526.5/532 nm	5 mJ	10 mJ	20 mJ
351/355 nm	3 mJ	6 mJ	12 mJ
263/266 nm	2 mJ	4 mJ	8 mJ
211/213 nm	0.5 mJ	1 mJ	2 mJ
Optional attenuator ¹⁰⁾
Transmission range	1 – 95 %
Dimensions
Laser head ( W×L×H)	160× 230 × 141 mm³
Controller unit (W×L×H)	108× 191 × 59 mm³
Power adapter (W×L×H) ¹¹⁾	80 × 120 × 60 mm typical
Operating requirements
Cooling requirements	Air cooled
Ambient temperature	15 – 30 ºC
Relative humidity	10 – 80 % (non-condensing)
Mains voltage	90-230 VAC, single phase, 47-63 Hz ¹²⁾
Average power consumption	50 W	80 W	100 W

100/200 Hz 重复频率参数 ¹⁾

Model	Q2
Model	-200	-100	-A100	-B100	-C100
Wavelength, nm	1064 nm
Pulse repetition rate ²⁾	200 Hz	100 Hz
Pulse energy, mJ	1 mJ	2.5 mJ	5 mJ	10 mJ	20 mJ
Typical pulse duration ³⁾	< 10 ns		<8 ns		<7 ns
Pulse to pulse energy stability ⁴⁾	< 0.5 % RMS
Power drift ⁵⁾	± 3.0 %
Beam profile	Bell-shaped, >80 % fit to Gaussian
Beam divergence ⁶⁾	< 2 mrad		< 1.5 mrad		<1 mrad
Polarization	Linear, horizontal
Typical beam diameter ⁷⁾	1.5 mm		2.0 mm	2.5 mm	3.5 mm
Jitter ⁸⁾	< 0.5 ns RMS
Optional harmonics generator ⁹⁾
Pulse energy
532 nm	0.5 mJ	1.25 mJ	2 mJ	5 mJ	10 mJ
355 nm	0.25 mJ	0.6 mJ	1 mJ	3 mJ	6 mJ
266 nm	0.1 mJ	0.3 mJ	0.7 mJ	1.5 mJ	3 mJ
213 nm	0.02 mJ	0.06 mJ	0.3 mJ	0.7 mJ	1 mJ
Optional attenuator ¹⁰⁾
Transmission range	1 – 95 %
Dimensions
Laser head ( W×L×H)	160× 230 × 141 mm³
Controller unit (W×L×H)	108× 191 × 59 mm³
Power adapter (W×L×H) ¹¹⁾	192 × 178 × 46 mm³ typical (for +28 VDC output)
Operating requirements
Cooling requirements	Air cooled
Ambient temperature	15 – 30 ºC
Relative humidity	10 – 80 % (non-condensing)
Mains voltage	90-230 VAC, single phase, 47-63 Hz ¹²⁾
Average power consumption	40 W	50 W	70 W	80 W	100 W

Due to continuous improvements all specifications are subject to change. Unless stated otherwise all specifications are measured at fundamental wavelength and maximum pulse repetition rate. The parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture.
Factory-set pulse repetition rate is fixed at max repetition rate shown in the table.
At FWHM level at 1053 or 1064 nm, measured with 350 ps rise time photodiode. Short pulse duration version is available, with pulse duration shorter by approx 50%. Inquire for detailed specifications.
Measured during 30 seconds operation after warm-up.
Over 8 hour period after 20 minutes of warm-up when ambient temperature variation is less than ±2 °C.
Full angle measured at the 1/e²level.
Beam diameter is measured 20 cm from laser output at the 4σ level.
In respect to falling edge of pump diode triggering pulse.
Q2 is compatible with our attachable second harmonic generator, model SHG, and all models of stand-alone H-SMART harmonics generator. Pulse energies presented here are maximum values. Please refer to harmonic generator datasheets for detailed specifications.
Motorized attenuator intended to be attached to the laser housing. Transmission can be changed remotely trough laser web-server control interface.
Laser can be powered from appropriate 27 VDC power source. Please inquire for details.

激光加工测试系统

光学测量仪器

光学成像系统

激光光学类

光谱辐射测量系统

材料物理仪器

光纤光学仪器

精密位移台

光机械

高峰值功率脉冲激光器-7ns

销售排行榜

推荐

浏览历史

相关商品